64
⑤ Click the “Playback” button to play the record in the playback interface (refer to 8.2
Playback Interface Introduction for details). Click “Close” to close the interface.
Time Slice Mode Selecting:
Method One: Click the “Ye a r ”, “Month” or “Day” button under the record time scale to select
the time slice mode. In “Day” mode, click / on the left/right side of the time scale
to view the record of the last/next day; click “Minute” in the “Picture” option under the time
scale to select “Minute” mode (in “Minute” mode, click the time scale to change the time of the
60 display windows) and click “Hour” to select “Hour” mode.
Method Two: Click beside “Camera Thumbnail” on the left top corner of the interface
to select the time slice mode.
Method Three: Right-click the mouse on any area of the time-sliced interface to go back to the
upper interface.
8.4.2 Smart Search
① Click StartSearch and BackupSmart Search to go to “Smart Search” tab as shown
below.
Behavior Detection: when you select the smart playback mode, the system will analyze the
video including the motion detection, tripwire and intrusion detection.
② Click “Behavior”. Set the searching time period and you will search the channel which has
Note: If you back up the record in private format, the system will back up a RPAS player to USB
device automatically. The private format record can be played by RPAS player only.
To Next Page
Loading...