124
Appendix E Personal Data Collection Description
There are five functions concerning the personal data collection under the network modules of the
device, including PPPoE, DDNS, E-mail, 802.1x and FTP. In the device, these functions are used by
the client-end of the device to communicate with the server of the customer’s company (or service
supplier). As the client-end, our device needs to keep the authentication credentials (username and
password) used to connect the server. These credentials can be configured through the Web client of
the device and then sent to the device. The process of the data transmission and storage are as
follows.
Function
Transmission Type Storage Type Authentication
PPPoE
TLS+AES256(password)
Password:AES256
Username/Password
DDNS
TLS+AES256(password)
Password:AES256
Username/Password
E-mail
Username,
Password,
E-mail address
TLS+AES256(password)
Password:AES256
The E-mail address
will be desensitized
before it is displayed
Username/Password
802.1x
TLS+AES256(password)
Password:AES256
Username/Password
FTP
TLS+AES256(password)
Password:AES256
Username/Password
Statement:
Except for service authentication when communicating with the server, we will never share these personal data stored on
the device to the third-party or use them by ourselves without the client’s authorization.
The log will record the operator's operation steps and change records, and will not contain any information about the
collected personal data.