38
6 PTZ
6.1 PTZ Control Interface Introduction
You can control the dome or PTZ which connects to the camera for PTZ control.
Click on the tool bar at the bottom of the live preview window to go to the PTZ control
interface as shown below. You can select another dome or PTZ which connects to the camera
on the top right of the interface for PTZ control.
Introductions of the buttons on the bottom right of the interface:
Button Meaning
Click / / / / / / /
to rotate the dome. Click to stop rotating the dome.
Click / to zoom in / out the camera image.
Click / to increase / decrease the focal length.
Click / to increase / decrease the iris of the dome.
Drag the slider to adjust the rotating speed of the dome.
/ Click / to start / stop recording.
/
Click / to hide / show the analog joystick.
Click it to return to the live view interface.
To Next Page
Loading...