Why does my iPECS Telephone say 'User Info not registered'?
The 'User Info not registered' message on your iPECS Telephone indicates that the system setting data is not registered on the system. Set the data to register, such as Direct Send, Remote mode, System IP, and so on.
How to resolve 'Failed to scan AP' on iPECS Telephone?
When the scanning APP fails on your iPECS Telephone, try again. If it fails too, check the AP status.
General| Resolution | 176 x 220 pixels |
|---|---|
| Standby Time | 200 hours |
| Headset Jack | 2.5 mm |
| Speakerphone | Yes |
| Vibration | Yes |
| Directory | 500 entries |
| Bluetooth | Yes |
Complies with international product safety standards like IEC60950-1.
Crucial safety information to prevent injury, death, or property damage.
Instructions for installing, removing, and charging the phone's battery.
Procedures for powering the phone on and off.
How to navigate menus and select options using the phone's keys.
Guide to typing text, numbers, and symbols using the keypad.
Steps for registering the phone with the iPECS system.
Instructions on how to dial numbers and initiate calls.
Using assigned numbers for quick dialing.
How to answer incoming calls using the phone or headset.
Procedures for ending an active call.
How to activate and deactivate the phone's keypad lock.
Steps to create a new contact entry with name, number, and other details.
How to search for contact entries by name, number, or group.
Assigning numbers for quick dialing.
Procedures for assigning speed dial numbers.
Setting how the phone alerts for incoming calls (ring/vibrate).
Selecting ring tones for incoming calls from categories.
Adjusting the volume level for ring tones.
Viewing the list of the last 100 dialed, received, or missed calls.
Accessing and navigating the call history list.
How to redial numbers directly from the call history.
How to view received text messages.
Composing and sending text messages.
Accessing and managing received messages.
Managing events, setting reminders, and viewing calendar.
Creating new schedule entries with subject, time, and type.
Using the phone's notepad to compose and save notes.
Steps to write and save a new memo.
Setting and managing alarms with time, repeat, and ringtone.
Procedures for creating a new alarm.
Redirecting incoming calls to another number.
Steps to enable call forwarding for different scenarios.
Procedures to disable call forwarding.
Setting up and managing conference calls.
How to initiate a conference call with multiple parties.
Procedures to end an active conference call.
Activating/deactivating the feature to silence incoming calls.
Enabling the Do Not Disturb function.
Disabling the Do Not Disturb function.
Programming and using speed dial numbers.
How to save frequently dialed numbers.
Making calls using speed dial numbers or names.
Redirecting an active call to another number.
Transferring calls after announcing to the recipient.
Transferring calls directly without announcement.
Creating, managing, and connecting to wireless LAN profiles.
Steps to create new wireless LAN connection profiles.
Using the pre-configured default network profile.
Establishing a connection using a created wireless LAN profile.
Configuring system settings related to MFIM.
Manually entering the IP address for iPECS system registration.
Restoring the phone to its original factory default state.
Steps to diagnose and resolve complete phone failure.
Steps for resetting the phone to resolve functional issues.
A guide to common phone problems and their solutions.
To Next Page
