9
The equipment is designed for: 1) indoor use, 2) operation at less than 2000 meters altitude, 3) Over
Voltage Category I, 4) a Pollution Degree 2 environment, and 5) dry locations. Refer to product
specifications for additional information.
This equipment is not suitable for use in wet locations, or where children are likely to be present. Keep
this equipment away from sources of shock or vibration.
IPG provides the following recommendations to promote the long life of the 2D Scanner:
Do not expose the device to a high moisture environment (>95% humidity).
Ensure that the work area is properly vented. Gases, sparks, and debris that can be generated
from interaction between the laser and the work surface can pose additional safety hazards.
To Next Page
Loading...
