IPG Photonics Scanner Series - Product Part Numbers

14
2.3 Product Part Numbers
Product part numbers and serial numbers are located on a white sticker on the scan head and on the
Scan Controller. Figure 2-3 outlines the product label on both a scan head and Scan Controller.
IMPORTANT
Scan heads and Scan Controllers are tuned as a single pair. This means that a scan
head should only be used with the Scan Controller that it is paired with. Using a
scan head with a Scan Controller that have not been tuned may result in damage
to the scan head.
Figure 2-3 Scanner and Scan Controller Labels
Note
Old part number conventions may use a P30-Series number. If users cannot
determine their product configuration using the configurations provided below,
please contact an IPG Sales Representative or Product Specialist.