IPG Photonics Scanner Series - Computer Specifications (for Use with IPG Scan Controllers)

23
3.6 Computer Specifications (For use with IPG Scan Controllers)
In order to operate any IPG Scanner with a Scan Controller, a computer must be connected and running
IPGScan at all times.
Table 3-6 details minimum computer specifications that must be met for use with IPGScan software.
Table 3-6 Computer Specifications
Operating System
Windows 10, Professional or Enterprise | 64-bit
CPU
- 6 cores
- 3.60 GHz Operating Frequency
- CPUmark (23323 MT / 2256 ST)
RAM
- 32 GB DDR4-2400 ECC
Hard Drive
- 250 GB SSD
Connections
- Ethernet Ports
o One is required for connecting to the Scan Controller
o (Robotic OTF Processing Only) One for robot
communications
o (Optional) One for Remote API (TCP/IP) functionality
with IPGScan
o (Optional) One for connecting to laser software (i.e.
LaserNet)
o (Optional) One for an Ethernet camera
While IPG does not supply a computer with the purchase of a scanner, the computer that is supplied
with the purchase of an LDD system is capable of running IPGScan. Please refer to the appropriate LDD
documentation or consult with an LDD Product Specialist for details concerning the LDD computers.