IPG Photonics Scanner Series - YLS Series Lasers; Scan Controller to YLS Series Laser (with Hardwire Interface) Connections

63
7.3 YLS Series Lasers
The following sections outline the setup between a YLS Series laser and an IPG Scan Controller.
7.3.1 Scan Controller to YLS Series Laser (with Hardwire Interface) Connections
Please refer to Figure 7-2 for Scan Controller to YLS Series laser connections. This configuration assumes
a YLS Series laser that has a hardwire interface.
Figure 7-2 Scan Controller to YLS Laser (Hardwire Interface) Connections
IMPORTANT
Laser Error Signal: Users who have previously integrated IPG Lasers may be custom
to using the Laser Error signal for PLC/System logic. If users would still prefer to do
this, please contact an IPG Product Specialist.