IPG Photonics Scanner Series - Page 68

62
c. Ext. Guide Control: ON
d. Modulation: ON
e. Analog Control: ON
4. Press the Return button.
5. Turn the key switch on the laser to REM.
QCW Mode
1. Turn the key switch on the laser to ON.
2. Using the touch screen, set the laser to QCW.
3. Enter the Setup menu and set the following parameters as detailed.
a. Gate: Disabled
b. Ext. Emission Control: ON
c. Ext. Guide Control: ON
d. Modulation: ON
e. Analog Control: ON
4. Press the Return button.
5. Turn the key switch on the laser to REM.