69
9 Maintenance
9.1 Overview
The Mid and High-Power Scanners are incorporated into a given fixed installation. The safety functions
should be tested in a defined periodic maintenance interval.
The time cycle of this interval is dependent on the safety analysis of the system where the scanners are
installed.
Only personnel knowledgeable in the related functional safety assessment of the system should
determine such maintenance.
9.2 Water Treatment and Corrosion Prevention
In order to maintain proper working order of the IPG Scanners, it is important to maintain and treat the
water used for cooling the optics. The following documents must be followed in order to maintain
proper functioning of the scanners.
IPG Water Treatment Kit Procedure
Water Treatment Kit Instruction Sheet
Please contact your Sales Representative or service@ipgphotonics.com for such documents.
To Next Page
Loading...