Chapter 4 IP Testing
Ping testing
156
HST-3000 Ethernet Testing User’s Guide
5 Specify values for the following settings:
IPv4 IPv6 Setting Parameters
Yes Yes Destination Type Specify how you will identify
the device you are verifying
connectivity to:
– IP Address - to type the
address of the device.
– Host Name - to type name
of the device.
Yes Yes Destination IP
(if Destination Type is
IP Address)
Enter the destination IP
address of the device you are
pinging.
Yes Yes Destination Name
(if Destination Type is Host
Name)
Type the name for the destina-
tion host using up to 255 char-
acters. For example, if the
destination host’s name is
Yahoo, type
“www.yahoo.com”.
Yes No Time To Live Specify the time after which a
ping request or response can
be deleted by any device on a
circuit as a number of hops.
The default time to live setting
is 64 hops.
Yes No TOS/DSCP Select one of the following:
– Type of Service, then enter
a number representing the
type of service.
– DSCP, then select a
name.
No Yes Traffic Class Enter a number representing
the traffic class using a hexa-
decimal format ranging from
0x0 to 0xFF.
To Next Page
Loading...
