Chapter 8 SAMComplete Testing
Managing test results
248
HST-3000 Ethernet Testing User’s Guide
Managing test
reports
After running tests, you can create a report for the test. Or, at
any time, you can review a report.
Creating a report
You can save the results of a test in a report.
To create a report
1 After running a test, press the Results soft key, and then
select Save SAMComplete Report.
2 Specify a name for the report, and then press the OK key.
The report is created as both a PDF and TXT file are
placed in the following directory:
/results/SAMComplete/
in the sub-directory for the type of test you were running.
For example, if you were running an optical Ethernet
Multi-Stream Terminate application, the report would be
found in:
/results/SAMComplete/ethopic_mstr_term/
Viewing a report
If you wish to review a report on the instrument, you can open
the txt version using the file manager. You can export the
PDF report for viewing on a PC or laptop.
To Next Page
Loading...
