EasyManua.ls Logo

JDS Uniphase HST-3000 - Pattern Stats Results; Ping Results

JDS Uniphase HST-3000
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Test Results
Pattern Stats results
HST-3000 Ethernet Testing Users Guide
307
Pattern Stats results
The Pattern Stats category displays results associated with
the transmission of layer 2 patterns over a circuit when testing
optical Ethernet. Table 41 describes the results that appear in
the Pattern Stats category.
Ping results
The Ping category lists results associated with Ping testing.
Results in this category accumulate after you transmit a ping
packet over the link to verify connectivity. Table 42 describes
the results that appear in the Ping category.
Table 41 Pattern Stats test results
Result Description
Rx Frames ALL The number of valid and errored frames
received since the link was established.
Tx Frames ALL The number of frames transmitted
since the link was established.
Table 42 Ping test results
Result Description
Delay (ms) The current round trip delay for all pings
sent and successfully received by the
HST since the last test restart. Calcu-
lated in milliseconds.
Delay, Avg (ms) The round trip delay for all pings sent
and successfully received by the HST
since the last test restart. Calculated in
milliseconds.
Delay, Max (ms) The maximum round trip delay for the
pings sent and successfully received by
the HST. Calculated in milliseconds.

Table of Contents

Other manuals for JDS Uniphase HST-3000

Related product manuals