Chapter 1 Getting Started
Test applications
10
HST-3000 Ethernet Testing User’s Guide
Test applications
Terminate, monitor, and thru applications are provided when
testing 10/100/1G electrical or 1G optical signals; terminate
and monitor applications are available when testing 100M
optical signals.
Terminate
applications
When running a terminate application, the HST separates the
transmit and receive paths. The received signal is terminated,
and a completely independent signal is transmitted.
Table 8 Ethernet connectors
Connector Label Location Type Description
R/T 1 and R/T 2 Left side of SIM RJ-45 Used for 10/100/1G electrical
connections.
R/T 1 and R/T 2 Top of SIM SFP Used for 1G optical connec-
tions. The R/T 2 connector can
also be used for 100M connec-
tions (100M testing is not sup-
ported on the R/T 1
connector).
ETHERNET Top of Base Unit RJ-45 Used for Ethernet TE, VoIP,
and IP Video testing. Do not
use this connector when test-
ing 10/100/1000 Mbps inter-
faces in monitor, thru, or
terminate modes.
For details, see the HST-3000
VoIP Testing User’s Guide.
To Next Page
Loading...
