Chapter 8 SAMComplete Testing
Managing test results
246
HST-3000 Ethernet Testing User’s Guide
Figure 51 provides an example of the Config Step Details
results.
To see the results for a different service, press the Service
soft key and select the desired service.
Performance
The Performance results are available for several perfor-
mance factors (SLAs):
– Status
Provides an overview of the performance test result
including the received information rate and average frame
loss rate, delay and delay variation SLAs including pass/
fail status for each SLA across all the services. Figure 52
on page 247 provides an example of the Performance
Status results
– IR (information rate)
Provides the current, min, max, and average information
rate, as well as the CIR per service.
Figure 51 Multi-stream Config Step Detail
To Next Page
Loading...
