Appendix A Test Results
IP Config results
294
HST-3000 Ethernet Testing User’s Guide
IP Config results
The IP Config category lists results associated with the
assignment of static IP addresses, the assignment of IP
addresses by a DHCP server, or, if you are testing in PPPoE
mode, results associated with the PPPoE log-on process.
Results in this category accumulate after you transmit traffic
over the link. Table 37 describes the results that appear in the
IP Config category. When transmitting multiple streams, many
results are available for each transmitted stream.
Tx Mbps, Cur L2 The current data rate of transmitted
frames calculated over the prior second
of test time. Data rate is the frame
bandwidth, excluding the preamble and
minimum inter-frame gap.
VLAN ID Displays the VLAN ID of the last
received tagged frame in the stream.
VLAN Priority Displays the VLAN priority of the
tagged frames in the stream.
Table 33 Streams test results (Continued)
Result Description
Table 34 IP Config test results
Result Description
Data Mode Indicates whether the HST is config-
ured for a PPPoE session or an IPoE
connection.
Dest. IP Addr. Displays the Destination IP address as
defined for the currently configured
port.
Destination MAC
Address
Displays the Destination MAC address
obtained using ARP.
To Next Page
Loading...
