Appendix A Test Results
J-Proof (transparency) results
HST-3000 Ethernet Testing User’s Guide
279
J-Proof (transparency) results
Table 23 lists the J-Proof results associated with the loopback
of control frames for various protocols.
Tx Router Solicit
Msg.
A count of transmitted router solicitation
messages when running an IPv6 appli-
cation. This count is not reset when you
restart a test; to reset the count you
must bring down the link, reestablish
the link, and then start the test again.
Unicast Frames The number of Ethernet unicast frames
received since starting the test.
Unicast Packets The number of IP unicast packets
received since starting the test.
Table 22 Link Counts test results (Continued)
Result Description
Table 23 J-Proof test results
Result Description
Name Displays the name specified when you
configured the test frame.
Tx A count of the number of test frames for
a particular test frame type transmitted
by the instrument since the last test
start or restart.
Rx A count of the number of test frames for
a particular test frame type received by
the instrument since the last test start
or restart.