EasyManua.ls Logo

JDS Uniphase HST-3000 - Error Stats results

JDS Uniphase HST-3000
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Test Results
Link Counts results
278
HST-3000 Ethernet Testing User’s Guide
Rx UDP Packets A count of UDP packets received since
starting the test, excluding errored
frames since starting the test.
Rx VLAN Frames A count of VLAN encapsulated frames
received since starting the test, exclud-
ing errored frames.
Span Tree Frames A count of received 802.1d spanning
tree frames since frame detection.
Transmitted Frames A count of frames transmitted since
starting the test. This result does not
appear when testing in Monitor applica-
tion.
Tx Acterna Frames A count of transmitted Acterna frames
since starting the test. This result does
not appear when testing using the Mon-
itor application.
Tx Frame Bytes A count of the total bytes transmitted
within an Ethernet frame from the Des-
tination MAC Address to the FCS,
inclusive.
Tx IP Packets A count of IP packets transmitted since
starting the test. This result does not
appear when testing in Monitor applica-
tion.
Tx Late Collisions A count of the number of times the HST
has transmitted a frame, and then
experiences a collision more than 64
byte times after the transmission
begins. This result only appears for
half-duplex 10/100/1G electrical Ether-
net tests.
Table 22 Link Counts test results (Continued)
Result Description

Table of Contents

Other manuals for JDS Uniphase HST-3000

Related product manuals