Chapter 1 Getting Started
Restarting tests
HST-3000 Ethernet Testing User’s Guide
39
Restarting tests
Pressing the Restart soft key (at the bottom of the Results
display) clears statistical and historical results and restarts
your test.
Viewing test results
After you start a test, the Summary category appears showing
an overview of the test results. You can view other results by
selecting a different test result category.
To view test results
1 Configure and run a test.
2 Press the Display soft key, and then do one of the
following:
– Use the arrow keys to highlight a result category, and
then press OK.
– Press the number corresponding to the category.
If a leading zero appears in front of a number, you must
also enter the leading zero. For example, if you want to
display the third category listed on a menu with more
than ten categories, press “0”, and then “3”. If you want
to display the eleventh category on the menu, press “1”
twice.
The test results for the category appear.
For descriptions of test results, see “Test Results” on
page 257.
To Next Page
Loading...
