JDS Uniphase HST-3000 - L2 Backbone Results; L2 Customer Results

Appendix A Test Results
L2 Backbone results
274 HST-3000 Ethernet Testing User’s Guide
L2 Backbone results
When testing MiM encapsulated traffic, backbone link statis-
tics and counts appear in the L2 Backbone Link Stats and L2
Backbone Link Counts categories. In addition to the standard
link counts, counts of received PBB frames and frame bytes
are provided. Additional statistics are provided for the B-Tag
and I-Tag values carried in the analyzed traffic.
L2 Customer results
When testing MiM encapsulated traffic, customer link statis-
tics and counts appear in the L2 Customer Link Stats and the
L2 Customer Link Counts categories.
Tx Mbps, Cur L4 The current bandwidth utilized by the
transmitted layer 4 IPv4 traffic
expressed in megabits per second.
This measurement is an average taken
over the prior second of test time.
Tx Mbps, Cur L4
(IPv6)
The current bandwidth utilized by the
transmitted layer 4 IPv6 traffic
expressed in megabits per second.
This measurement is an average taken
over the prior second of test time.
VLAN ID Displays the VLAN ID for the last VLAN
or Q-in-Q tagged frame received.
VLAN Priority Displays the VLAN Priority for the last
VLAN or Q-in-Q tagged frame received.
Table 21 Link Stats test results (Continued)
Result Description