JDS Uniphase HST-3000 - Chapter 5 TCP;UDP Testing

5
HST-3000 Ethernet Testing User’s Guide 163
Chapter 5 TCP/UDP Testing
This chapter provides step-by-step instructions for testing
TCP/UDP service using the HST-3000 with an Ethernet SIM.
Topics discussed in this chapter include the following:
– “About TCP/UDP testing” on page 164
– “Selecting a layer 4 TCP/UDP test” on page 165
– “Specifying layer 2 and layer 3 settings” on page 166
– “Configuring layer 4 traffic” on page 167
– “Transmitting layer 4 traffic” on page 178
– “Inserting errors” on page 179
– “Inserting pause frames” on page 179
– “Loopback testing” on page 179