Chapter 4 IP Testing
Monitoring IP traffic
162
HST-3000 Ethernet Testing User’s Guide
(see “Filtering received traffic using layer 3 criteria” on
page 142).
Configuration menus are provided that allow you to
specify filter criteria for each port.
6 If you need to specify other settings for the test, use the
left and right arrow keys to go to the appropriate menu;
otherwise, press the Home button to return to the Main
screen.
The HST monitors and analyzes received traffic. If you are
testing in Thru mode, received traffic is passed through to the
transmitter of the opposite port.
NOTE:
If you are running an IPv6 application, and you want to
analyze all received layer 3 traffic (IPv4 and IPv6), be
certain to set the IP Version setting to Don’t Care.
To Next Page
Loading...
