Chapter 7 Automated RFC 2544 Testing
Sample RFC 2544 reports
HST-3000 Ethernet Testing User’s Guide
219
You can view the text file on your unit using the File Manager.
To view the PDF file, you must first retrieve the file from your
unit using ftp, and then view the file on a workstation with a
PDF viewer. For details, see the HST-3000 Base Unit User’s
Guide.
Sample RFC 2544 reports
Sample Expert RFC 2544 reports for tests run in Asymmetric
mode are provided in Figure 39 on page 220 through
Figure 46 on page 227. The samples provided were not
generated using the same test.
The basic report structure consists of a report cover sheet, a
summary of the overall test results, a summary of the setup
parameters used to run the test, and then the results for each
test that you ran.
System information is also provided such as the software
version, test instrument name, and the HST’s serial number.
If you are running an asymmetric RFC 2544 test, this informa-
tion is provided for the master and the slave HSTs.
To Next Page
Loading...
