Appendix A Test Results
Link Stats results
HST-3000 Ethernet Testing User’s Guide
273
Total Util %, Cur The current bandwidth utilized by the
received traffic expressed as a percent-
age of the line rate of available band-
width. This measurement is an average
taken over the prior second of test time.
Total Util %, Min The minimum bandwidth utilized by the
received traffic since the test started
expressed as a percentage of the line
rate of available bandwidth.
Total Util %, Peak The highest (peak) bandwidth utilized
by the received traffic since the test
started expressed as a percentage of
the line rate of available bandwidth.
Tx Mbps, Cur L1 The current bandwidth utilized by the
transmitted traffic expressed in mega-
bits per second. This measurement is
an average taken over the prior second
of test time.
Tx Mbps, Cur L2 The current data rate of transmitted
frames calculated over the prior second
of test time. Data rate is the frame
bandwidth, excluding the preamble and
minimum inter-frame gap.
Tx Mbps, Cur L3 The current bandwidth utilized by the
transmitted layer 3 IPv4 traffic
expressed in megabits per second.
This measurement is an average taken
over the prior second of test time.
Tx Mbps, Cur L3
(IPv6)
The current bandwidth utilized by the
transmitted layer 3 IPv6 traffic
expressed in megabits per second.
This measurement is an average taken
over the prior second of test time.
Table 21 Link Stats test results (Continued)
Result Description
To Next Page
Loading...
