Appendix A Test Results
Link Stats results
272
HST-3000 Ethernet Testing User’s Guide
Rx Mbps, Cur L4
(IPv6)
The current bandwidth utilized by the
received layer 4 IPv6 traffic expressed
in megabits per second. This measure-
ment is an average taken over the prior
second of test time.
Est. TCP Thruput
(Mbps)
Displays the estimated TCP through-
put. The estimate is calculated by divid-
ing the TCP Window Size that you
specified on the TCP/UDP configura-
tion menu (when you configured your
test) by the average round trip delay
measurement (Delay, Avg (us)) for the
test.
If a particular combination of
TCP Window Size and round trip delay
yields an estimated throughput that
exceeds the line rate, the line rate will
be displayed.
Svc Disruption (us) The service disruption time (maximum
inter-frame gap) when service switches
to a protect line calculated in microsec-
onds.
SVLAN Frame DEI Displays the DEI of the last received
Q-in-Q tagged frame.
SVLAN ID Displays the SVLAN ID for the last
received Q-in-Q tagged frame.
SVLAN Priority Displays the SVLAN Priority for the last
received Q-in-Q tagged frame.
Total Util %, Avg The average bandwidth utilized by the
received traffic, expressed as a per-
centage of the line rate of available
bandwidth since the test started. The
average is calculated over the time
period elapsed since the test started.
Table 21 Link Stats test results (Continued)
Result Description
To Next Page
Loading...
