Appendix A Test Results
Link Stats results
HST-3000 Ethernet Testing User’s Guide
271
Packet Size, Avg The average size of IPv4 packets
received since packet detection. The
average is calculated over the time
period that elapsed since the last test
restart.
Packet Size, Max The maximum size of IPv4 packets
received since packet detection.
Packet Size, Min The minimum size of IPv4 packets
received since packet detection.
Rx Mbps, Cur L1 The current bandwidth utilized by
received traffic expressed in megabits
per second. This measurement is an
average taken over the prior second of
test time.
Rx Mbps, Cur L2 The current data rate of received
frames calculated over the prior second
of test time. Data rate is the frame
bandwidth, excluding the preamble and
minimum inter-frame gap.
Rx Mbps, Cur L3 The current bandwidth utilized by
received layer 3 IPv4 traffic expressed
in megabits per second. This measure-
ment is an average taken over the prior
second of test time.
Rx Mbps, Cur L3
(IPv6)
The current bandwidth utilized by the
received layer 3 IPv6 traffic expressed
in megabits per second. This measure-
ment is an average taken over the prior
second of test time.
Rx Mbps, Cur L4 The current bandwidth utilized by
received layer 4 IPv4 traffic expressed
in megabits per second. This measure-
ment is an average taken over the prior
second of test time.
Table 21 Link Stats test results (Continued)
Result Description
To Next Page
Loading...
