Appendix A Test Results
Link Stats results
HST-3000 Ethernet Testing User’s Guide
269
Delay, Max (us) The maximum round trip delay calcu-
lated in microseconds. Your near end
HST must originate an Acterna payload
and receive traffic from a far end JDSU
Ethernet test set (in loopback mode) to
measure delay accurately.
Delay, Min (us) The minimum round trip delay calcu-
lated in microseconds. Your near end
HST must originate an Acterna payload
and receive traffic from a far end JDSU
Ethernet test set (in loopback mode) to
measure delay accurately.
Frame Rate, Avg The average rate of received frames,
expressed in frames per second. The
average is calculated over the time
period that elapsed since the last test
restart.
Frame Rate, Cur The current rate of received frames,
expressed in frames per second. This
measurement is an average taken over
the prior second of test time.
Frame Rate, Min The minimum rate of received frames
over a one second period, expressed in
frames per second.
Frame Rate, Peak The highest (peak) rate of received
frames over a one second period,
expressed in frames per second.
Frame Size, Avg The average size of frames received
since frame detection. The average is
calculated over the time period that
elapsed since the last test restart.
Frame Size, Max The maximum size of frames received
since frame detection.
Frame Size, Min The minimum size of frames received
since frame detection.
Table 21 Link Stats test results (Continued)
Result Description
To Next Page
Loading...
