JDS Uniphase HST-3000 - Electrical specifications

Appendix A Test Results
Streams results
292 HST-3000 Ethernet Testing User’s Guide
Packet Jitter, Peak
(us)
The highest packet delay variation
measured for the stream since the last
test restart, calculated in microseconds.
Received Frames A count of all frames received for the
stream since starting the test, including
errored frames.
Rx Acterna Frames A count of all received frames for the
stream with an Acterna payload meet-
ing filter criteria since starting the test.
Rx L4 Destination
Port
Displays the Destination Port number
for the last layer 4 frame received in the
stream.
Rx L4 Source Port Displays the Source Port number for
the last layer 4 frame received in the
stream.
Rx Mbps, Cur L1 The current bandwidth utilized by the
received layer 1 traffic in the stream
expressed in megabits per second.
This measurement is an average taken
over the prior second of test time.
Rx Mbps, Cur L2 The current bandwidth utilized by the
received layer 2 traffic in the stream
traffic expressed in megabits per sec-
ond. This measurement is an average
taken over the prior second of test time.
Rx Q-in-Q Frames A count of Q-in-Q encapsulated frames
received for the stream meeting filter
criteria since starting the test.
Rx VLAN Frames A count of VLAN tagged frames
received for the stream meeting filter
criteria since starting the test.
SVLAN Frame DEI Displays the DEI of the last received
tagged frame in the stream.
Table 33 Streams test results (Continued)
Result Description