JLG X20JPLUS - 12 Maintenance; Safety Instructions for Greasing and Lubrication; Table of Recommended Lbrificants

MAINTENANCE
139
MUX20JP021602
BoomLiftModels X20JPLUS
12.MAINTENANCE
12.1.SAFETYINSTRUCTIONSFORGREASINGANDLUBRICATION
• Errorscan be extremely dangerous. Before greasing or making repairs read
theuserandoperationmanualcarefully.
•Handleallpartswithspecialcare.Keephands andfingersawayfromconce‐
aledspaces,gearing and similar.Always use approved safety devices, su chas
goggles,glovesandsafetyfootwear
•Donotdis
poseoflubricantsintheenvironmentbutrathercollectanddispose
ofthemincompliancewithlawsinforceinthecountryinquestion.
•Itisprohibitedtocarryout anymaintenanceoperationswiththeworkingarm
notcompletelyloweredand/orwithstabilisedmachine.
•Ifoperationsarebeingcarriedout,applyavi
siblesignonthecontrolposition,
stating“DANGER.Donotmovethemachine,serviceinprogress”.
12.1.1.Tableofrecommendedlbrifica nts
ENGINEOIL(M)
Forthepetrol/Dieselenginewerecommendtheuseofoilwiththefollowingcha‐
racteristics
OILHYDRAULICDRIVEMOTORS(T)
Forgear,werecommendtheuseofgearoilswithEPaddi
tivesviscosityclassac‐
cordingtoISOVG150orSAE80W/90(‐20°/+30°)orSAE85W/140(+10°/+
45°).
GREASEBEARINGANDIDLER(G)
Whenlubricatingtheslewringandtensioningtherubbertrackswerecommend
theuseofgreas
esuitableforuseintheconstructionequipmentindustry.TypeEP
NLGI2withthethickenerbaseSoapslithiumormolybdenumdisulphide.