JLG X20JPLUS - Washing the Outside of the Machine; Cleaning the Electrical System; After Cleaning

28
BoomLiftModels X20JPLUS
TECHNICALINFORMATIONS
MUX20JP021602
7.10.2.Washingtheoutsideofthemachine
AlwaysparkthemachineasshowninthefigureʺTerminology(p. 23)ʺ
Neveruseflammableliquids.
Cleanthemachineusingwater‐solubledetergents.Followthe instructionsprovi‐
dedbythemanufacturerofthedetergent.
Donotremoveprotectivecoversandcasingsofanykind.
7.10.3.Cleaningtheelectricalsystem
7.10.4.Aftercleaning
Dr
ythemachinecarefullybeforestartingitagain(forexampleusingcompressed
air).
Ifwashingthemachinewithwatercleaners,donotaimthe spraydi‐
rectlyontoadhesivelabelsandratingplates.carefullyprotectallthe
importantpartsandabovealltheelectricalcomponents.
Themoretheelevatingplatformiscleaned,themoreitwillneedtobegr
eased
Nevercleantheelectriccomponentswithwater,asthismaycausedamageto
theelectricalsystemofthemachine.
Onlyusedrydetergents,inaccordancewiththemanufacturerʹsin‐
structions.Neverremovecovers,guardsandthelike.