26
BoomLiftModels X20JPLUS
TECHNICALINFORMATIONS
MUX20JP021602
•It is prohibited to make modifications to the machine that could jeopardise
functioning and safety, without previous written authorisation from The Con‐
structorwhic hisnotliableforanyinjuryordamagecausedbythisbehaviour.
7.7. CLOTHINGANDPROTECTIVEEQUIPMENT
USETHETYPE‐APPROVEDANDCERTIFIEDSAFETYHARNESSES.BEFORE
WORKINGATAHEIGHT,MA
KESURETHATTHESAFETYHARNESSES
ARECORRECTLYFASTENEDANDCONNECTEDTOTHEANCHORAGE
POINTSONTHEBASKET.
THEUSEOFHARNESSESISCOMPULSORYINACCORDANCEWITHLO‐
CALLEGISLATIONINEACHINDIVIDUALCOUNTRY.INCOUNTRIES
WHERETHELAWDOESNOTREQUIRETHEUSEOFSUCHSAFETYSY‐
STEMS,THEEMPLOYERAND/
ORUSERISRESPONSIBLEFORCHOOSING
THESYSTEMTOBEUSED.
7.8. SAFETYVALVESANDELECTRICALSYSTEMSA FETY COMPONEN‐
TS
Itisprohibitedtomodifyand/ortamperwiththesafetyandcontrolvalvesof
themainhydraulicsystemandtheadjustmentsoftheelectricplant.TheCon‐
structorisnotliableforinjurytoperson
sanddamagetoobjectsortothema‐
chine if the standard calibration of any hydraulic and electric/electronic
componentistampered with.
Avoid wearing loose clothing, rings,
watchesor anythingelsethatmay get
caught in moving parts. When using
themachineorperformingmaintenan‐
ce,wear a hard hat, glasses,safety fo‐
otwear, gl
oves and acoustic earmuffs
after making sure these and all other
PPEthatthesafetymanagerconsiders
necessary based on the risk analysis
performedareinperfectworkingcon‐
dition.
Warning