JLG X20JPLUS - Operating the Machine from the Emergency Control Position on the Ground if the Operator Is Taken Ill

114
BoomLiftModels X20JPLUS
USINGTHEMACHINE
MUX20JP021602
11.5.2.Operatingthemachinefromtheemergencycontrolpositionontheground
iftheoperatoristakenill
Thisfunctionisonlyusediftheoperatorinthebasketbecomessuddenlyilland
unabletoperformordinarymovementsandtheemergencydescentofthebasket.
For informat ion on the controls in the emergency position, see the pa
ragraph
ʺEmergencypositioncontrols(p. 74)ʺ
Thesolepurposeoftheemergencydescentfrom thegroundistooperatein
the event of system breakdown and to bring the basket to the ground, all
otherusesareprohibited.
1 Withdraw the key
enabling the emergency
descent and a key ope ‐
ningthedistributorcon‐
trolsʹ protection, if any,
fr
om the engine keys
groupinsidethe electri‐
cal components com‐
partment.
Fig.110 Emergencykeylocation
2 Insert the key to open
thedistributorʹscontrols
protection and access
thecontrols.
Fig.111 Aerialpartdistributorprotection