JLG X20JPLUS - Safety Warnings; Generalities; Noise and Vibration

30
BoomLiftModels X20JPLUS
TECHNICALINFORMATIONS
MUX20JP021602
7.12.SAFETYWARNINGS
7.12.1.Generalities
Carefullyreadallthe safetymessagesprovidedinthismanualandthesafetysi‐
gnsonthemachine.Keepthesafetysignsingoodconditionandrep lace themif
theyaredamaged.Makesurethatanynewcomponentsonthemachinearepro‐
videdwiththecorrectsafetysigns.
7.12.2.NoiseandVibration
TheC
onstructordeclaresthattheplatformshavebeentestedaccordingtothepa‐
rametersofEuropeandirective2000/14EC,withtheguaranteedsoundpowerle‐
velmeasurementshownonthe machineʹs ECdeclarationofconformity. When
operatingtheaerialpartofthe machine,thisvalueisreducedevenfurtherasthe
basketmo
vesawayfromthemainsourceofnoise.Thevibrationstransmittedto
theoperatorfromthecontrolsanddirectlyfromthefloorofthebasketarelower
thanthemaximumallowedlimits0,5m/s2.
To avoid accidents, before starting
work and before performing any
maintenance operations, it is neces‐
sary to re
ad, understand and follow
allthepre c autionsandwarningscon‐
tainedinthismanual.Theuser/opera‐
tor of the machine must decline all
responsibility for operation until ha‐
ving read this manual and fully un‐
derstood how to use the machine
under the supervision of an expert
andqualifiedoperator.