JLG X20JPLUS - Fire Prevention; Preventing Damage Caused by Washing the Machine; Cleaning the Machine

TECHNICALINFORMATIONS
27
MUX20JP021602
BoomLiftModels X20JPLUS
7.9. FIREPREVENTION
7.10.PREVENTINGDAMAGECAUSEDBYWASHINGTHEMACHINE
BEFOREWASHINGTHEMACHINE,ALWAYSREMEMBERTOREMOVE
THEREMOTECONTROLANDCORRECTLYCLOSETHEREMOTECON‐
TROLANDEQUIPMENTCONNECTIONSOCKETSLOCATEDONTHEMA‐
CHINE.
7.10.1.Cleaningthemachine
Keeptheareaaroundthemotorclean,
removing fragments  of wood, paper
and other flammable products; clean
anyfu
elleaksasthesemaybeapoten‐
tial cause of fire. Petrol is extremely
flammable and explosive in particular
conditions. Refuel in well ventilated
areas and with the engine at rest.
Avoidsmokingand producing sparks
intherefuellingandfuelstoragearea.
Afterrefuelling,makesuretoputback
the cap corr
ectly. Take care to avoid
touching the exhaust silencer when
this is hot, i.e. with the machine run‐
ningorsoonafterstoppingtheengine.
Do not direct high pressure jets
towards the electrical components
whilewashingthemachine.Donotuse
chemical detergents or petrol that
woulddamagetheplasticpartsandthe
painting.
Whenwashingthemac
hine,theignitionblockmustbedisengaged,thekey
removedandtheemergencystopbuttonpressed.