JLG X20JPLUS - Page 70

68
BoomLiftModels X20JPLUS
INSTRUMENTSANDCONTROLS
MUX20JP021602
Toenablethispositionitisnecessarytooperateonthekey selectorplacedonthe
baseoftheturretandconnecttheoptionalsecondremotecontrol tothemachine.
Beforeproceedingwiththeconnectionreadcarefullyparagraphregardingthe
useoftheoptionalsecondremotecontrolʺMaintenancecontrolpositionwith
remotecontrolfromthegro
und(p. 144)ʺ.
Fig.62 Positionconnectoroptionalsecondremote
Thiscontrolpositionisusableonlytocarryoutcontrolsandmaintenanceon
themachine.Donotusethispositiontocontrolthemachineduringnormal
workingoperations.
Itisabsolutelyforbiddentomovethemachinefromthispositionif
oneoremo
reoperatorsareinthebasket.