Установка грузов за спицами
Behind-the-spokes placement
(Рис. 8-17) :
•
F5 (1, Рис. 8-19).
.
,
Alu.
, Alu 2,
Alu 2P, Alu 3 Alu 3P
.
.
Примечания
(Рис. 8-20).
.
/
.
To exit the Hidden Weight mode and display the normal
indication of imbalances (Fig. 8-17) proceed in the same
way:
• Use the F5 menu to select the Hidden Weight item
(1,Fig. 8-19). The imbalances for the left and right
compensation planes are displayed.
In this way wheels without spokes can be balanced even
when you are working with a program for weights behind
the spokes without having to change the Alu program for
a different weight placement.
In any case, as long as an Alu 2, Alu 2P, Alu 3 or Alu 3P
are set, weight placement behind the spokes can be
activated at any time.
Exiting the BALANCING screen does not exit the Hidden
Weight function.
Notes
The unbalance reading is only subdivided on two fitting
positions when the spoke position is stored (Fig. 8-20).
When balancing with counterweights positioned behind
the spokes if you also need to perform an Optimisation/
Minimisation run, do it before applying the weights.
After running an Optimisation/Minimisation procedure by
selecting the weights positioned behind the spokes mode,
the imbalance indicated is automatically split into two
application points behind the spokes.
To Next Page
Loading...