4.5 Справочная информация
, -
.
.
(Рис 4-1).
Вызов справки
HELP (1, Рис. 4-1).
(Рис. 4-11).
HELP
.
(Рис. 4-12).
HELP
.
.
Обратная прокрутка
HELP.
Примечание
: ,
.
HELP
.
Выход из справочного окна
ESC (2, Рис. 4-1).
4.6 Блокировка главного вала
Рис. 4-13
.
.
Примечание:
.
Примечание:
Power Clamp
Power Clamp
.
4.5 Help information
Help information explains the current action and, in the case of
an error code, provides hints for remedy.
The information displayed relates to the current action.
The complete help guide is available from the MAIN MENU
screen (Fig. 4-1).
Display help information
Press the HELP key (1, Fig. 4-1).
The first screen with help information appears, e. g. to the
screen RIM DATA INPUT (Fig. 4-11).
Press the HELP key once more to display the next
screen with help information.
The second screen with help information to the screen RIM
DATA INPUT (Fig. 4-12) appears. Continue to scroll through
all the help screens until you return to the first page.
The help screens can be scrolled in both directions.
Scrolling backwards
Press the upper part of the HELP key.
Note
You can only perform progressive movements in the help
screens, in both directions, once screen at the time
On pressing the HELP key in the last screen with help
information the display jumps to the first screen again.
Quit help information
Press the ESC key (2, Fig. 4-1).
4.6 Main shaft lock
Fig. 4-13 Pedal of main shaft lock
The main shaft is locked when the pedal is depressed. This
facilitates tightening or untightening of the clamping nut and
retains the wheel in the correction position for correct fitting of
the balance weights.
Note:
This lock is designed only to facilitate orientation of the wheel
and must not be used for braking the main shaft.
Note:
On wheel balancers equipped with the quickacting Power
Clamp system: The pedal also controls the Power Clamp,
for clamping the wheel on the balancer.
To Next Page
Loading...