JUKI DP2100 - Page 110

− 104 −
3) Change of counter set value
In case of the sewing counter, press SEWING
COUNTER SET VALUE CHANGE button
1, and in case of the No. of pcs. counter, press
NO. OF PCS. COUNTER SET VALUE CHANGE
button 2, and the set value input screen is
displayed. Here, input the set value.
(Refer to screen A.)
1
3
4
2
B
4) Change of counter existing value
In case of the sewing counter, press SEWING
COUNTER EXISTING VALUE CHANGE button
3, and in case of the No. of pcs. counter,
press NO. OF PCS. COUNTER EXISTING VALUE
CHANGE button 4 and the existing value
input screen is displayed. Here, input the existing
value.
(Refer to screen B.)
A