JUKI DP2100 - Explanation of Compensation Tension Manual (Level)

− 117 −
1) Display the memory switch list screen.
When MODE key 1 is pressed, MEMORY
SWITCH button 2 is displayed on the
screen. When this button is pressed, the memory
switch list screen is displayed.
2) Select Compensation tension mode.
Press UP/DOWN SCROLL buttons
3 to select Compensation thread tension
mode selection button 4.
Compensation tension mode selection screen is
displayed.
!0
4
(2) Explanation of compensation tension manual (level)
6) Set the compensation tension manual
(numerical value).
Input the compensation tension value for the step
to be selected with numerical value. The inputted
numerical value is added to or subtracted from the
needle thread tension value in motion as the offset
value.
When ENTER button !0 is pressed, the
compensation thread tension pop-up screen is
closed to determine the compensation tension
setting value.
And, the screen returns to the step details screen.
2
3
1
Compensation thread tension manual (level) is the way to perform inputting with the level selection when
inputting the compensation thread tension value that can be set to each step. Next, the setting procedure is
explained.