− 105 −
11-2 Count-up releasing procedure
When count-up condition is reached during sewing
work, the count-up screen is displayed and the buzzer
beeps.Press CLEAR button 1 to reset the
counter and the screen returns to the sewing screen.
Then the counter starts counting again.
1
12-1 How to register
12. REGISTERING THE PATTERN TO DIRECT BUTTON
Register the pattern No. which are frequently used with the direct buttons for use.
Once the patterns are registered, the pattern selection can be performed with ease by pressing only the
button.
1) Display the direct pattern register screen.
When 1 switch is pressed, direct pattern
register button 2 is displayed on the screen.
When this button is pressed, the direct pattern
register screen is displayed.
2
1
To Next Page
