JUKI DP2100 - Trial Sewing Function; Performing trial sewing

− 144 −
6
1
2
3
4
5
6
17-5 Performing setting of the production control information
3) Input the pitch time.
Next, input the pitch time required for one
process. When PITCH button 4 of the
aforementioned item 1) is pressed, the pitch time
input screen is displayed.
Input the value you desire with ten keys or UP/
DOWN buttons.
After the input, press ENTER button 6.
2) Input the final target value.
First, input the number of pieces of the target of
production in the process to which sewing is
performed from now on. When final target value
button 3 is pressed, the final target value
input screen is displayed.
Input the value you desire with ten keys or UP/
DOWN buttons.
After the input, press ENTER button 6.
1) Display the production control screen.
Display the production control screen referring to
"17-4 Observing the production control
information".