JUKI DP2100 - Changing the Shirring Amount <Shirring Amount Setting; Changing the Shirring Amount of Auxiliary Feed <Auxiliary Feed Shirring Amount Setting

− 27 −
1
2
A
1
2
A
(4) Changing the shirring amount <Shirring amount setting>
1) Press STEP SELECTION button 1
to select step.
2) Press "+"/ "–" buttons 2 to change
shirring amount set value A.
(5) Changing the shirring amount of auxiliary feed <Auxiliary feed shirring amount setting>
1) Press STEP SELECTION button 1
to select step.
2) Press "+"/ "–" buttons 2 to change
shirring amount set value for auxiliary feed A.