− 138 −
1
2
17-1 Observing the maintenance and inspection information
17. INFORMATION FUNCTION
There are three functions below in the information function.
1) Oil replacement (grease-up) time, needle replacement time, cleaning time, etc. can be specified and the
warning notice can be performed after the lapse of the specified time.
Refer to "17-1 Observing the maintenance and inspection information" and "17-2 Inputting
the maintenance and inspection time".
2) Speed can be checked at a glance and the target achieving consciousness as a line or group is increased
as well by the function to display the target output and the actual output.
Refer to "17-4 Observing the production control information" and "17-5 Performing setting
of the production control information".
3) Information on machine working ratio, pitch time, machine time and machine speed can be displayed
from the working state of the sewing machine.
Refer to "17-6 Observing the working measurement information".
1) Display the information screen.
When information key 1 of the switch seat
section is pressed in the data input screen, the
information screen is displayed.
2) Display the maintenance and inspection
information screen.
Press maintenance and inspection
informationscreen display button 2 in the
information screen.
To Next Page
Loading...
Need help?
General
