− 141 −
The same information as that in the normal
maintenance and inspection information screen is
displayed in the maintenance and inspection
information screen.
When button 3 of the item you desire to change
the inspection time is pressed, the inspection time
input screen is displayed.
3
When the designated inspection time is reached, the
warning screen is displayed.
In case of clearing the inspection time, press CLEAR
button 2. The inspection time is cleared and
the pop-up is closed. In case of not clearing the
inspection time, press CANCEL button 1 and
close the pop-up. Every time one sewing is completed,
the warning screen is displayed until the inspection
time is cleared.
Warning Nos. of the respective items are as
follows.
• Needle replacement : A201
• Cleaning time : A202
• Oil replacement time : A203
(Grease-up time)
4
2
5
1
3) Input the inspection time.
Input the inspection time.
When the inspection time is set to "0", the warning
function stops.
When clear button 4 is pressed, the value
returns to the initial value.
The initial values of the inspection time of
respective items are as follows.
• Needle replacement : 0 (1,000 stitches)
• Cleaning time : 0 (hour)
• Oil replacement time : 1,028 (hour)
(Grease-up time)
* Grease-up time is the time that 30 days/month, 5
days/week and 8 hours/day are converted to 6
months.
When ENTER 5 button is pressed, the
inputted value is determined.
17-3 Releasing procedure of the warning
The calculating method is
× 5 days × 8 hours.
7 days
30 days × 6 months
（
）
To Next Page
Loading...
