JUKI DP2100 - Copying the Pattern <Pattern Copy; Pattern Copy in Semi-Automatic Mode <Copy to Semi-Automatic

− 44 −
1
2
3
4
7
A
7) Press CANCEL button 7.
* When the number of patterns that have been
registered of fully-automatic is 99 patterns, the
display is automatically changed over and copied
to semi-automatic.
(2) Pattern copying from semi-automatic to fully-automatic <Copy to fully-automatic>
1) Press READY key 1 to change over the
screen to data input screen A.
2) Press PATTERN COPY button 2.
3) Press PATTERN No. button
3 to select the pattern of copy source.
4) Press COPY DESTINATION INPUT button 4.