JUKI DP2100 - Naming the Pattern <Data Name Setting

− 43 −
1
2
3
4
6
5
6-2 Copying the pattern <Pattern copy>
(1) Pattern copy in semi-automatic mode <Copy to semi-automatic>
1) Press READY key 1 to change over the
screen to data input screen A.
2) Press PATTERN COPY button 2.
3) Press PATTERN No. button
3 to select the pattern of copy source.
4) Press COPY DESTINATION INPUT button 4.
5) Press ten keys 5 to input the pattern
No. of copy destination.
6) Press ENTER button 6.
A