− 124 −
6) Determine the setting of shirring smoothing
function.
When ENTER button 8 is pressed, the
shirring smoothing function setting screen is closed
and the setting is determined. And, the screen
returns to the memory switch list screen.
When MODE key 9 is pressed, the data
input screen is displayed.
9
(1) Explanation of the size class
Setting procedure of the size class is explained here.
14-5 Explanation of the size class
1) Display the memory switch list screen.
When MODE key 1 is held pressed more
than 6 seconds, MEMORY SWITCH button
2 is displayed on the screen. When this button is
pressed, the memory switch list screen is
displayed.
When the fully-automatic mode is selected, it is possible to perform the setting of country class, basic size,
and gents'/ladies' at the time of creating a new pattern, the size display at the time of grading changes
according to the country class which has been set here.
2
8
The value which is set here is the value which becomes the initial value when creating a
pattern. Even when the value here is changed, the contents of the pattern which has been
already created do not change. However, only when the size country class is changed, the
display of size changes.
1
To Next Page
Loading...
