JUKI DP2100 - 14 Changing Memory Switch Data; Changing Procedure of Memory Switch Data

− 108 −
1) Display the memory switch data list screen.
When MODE key 1 is pressed, MEMORY
SWITCH button 2 is displayed on the
screen.
When this button is pressed, the memory switch
data list screen is displayed.
2) Select the memory switch button you desire to
change.
Press UP/DOWN SCROOL button
3 and select the data item button
4 you desire to change.
3) Change the memory switch data.
There are data items to change numerals and
those to select pictographs in the memory switch
data. No. in pink color such as is put on
the data items to change numerals and the set
value can be changed with ten keys and +/- buttons
displayed in the change screen.
No. in blue color such as is put on the data
items to select pictographs and the pictographs
displayed in the change screen can be selected.
For the details of memory switch data, refer to "14-
2 Memory switch data list".
14-1 Changing procedure of memory switch data
14. CHANGING MEMORY SWITCH DATA
2
1
4 3