− 21 −
1
2
5-5 Basic operation of the sewing machine
2) Press UP/DOWN SCROLL buttons
2 to display pattern No. button
of the pattern you desire to call.
Two programs (for right sleeve and left sleeve) are
entered in one pattern. Further, the respective
programs consist of single or plural steps (sewing data
between the respective notches are stored).
1) Press PATTERN SELECTION button 1.
(1) Prepare the materials.
Prepare right and left sleeves and garment body.
(2) Turn ON the power.
1) Turn ON the power switch.
2) Data input screen is displayed after the display of the initial screen.
Auto-lifter does not work until the screen moves to the sewing screen or the new creation
screen. After it has worked, it works in all screens. So, be careful.
(3) Calling the pattern <Pattern No. selection>
To Next Page
Loading...
