JUKI DP2100 - Correcting the Pattern; 8 Operation of the Sewing Machine (Fully-Automatic Application Volume); Changing the Length of Specified Step <Length between Steps Setting

− 64 −
8. OPERATION OF THE SEWING MACHINE
(FULLY-AUTOMATIC APPLICATION VOLUME)
8-1 Correcting the pattern
(1) Changing the length of specified step <Length between steps setting>
* The state that can be changed in the sewing screen
is the state that step 1 is selected before starting
sewing.
1) In the state that step 1 is selected, press STEP
DETAILS button 1.
1
3
4
5
2
2) Press STEP FEED/RETURN buttons
2 to select the step to be changed.
3) Press LENGTH BETWEEN STEPS SETTING
button 3.
4) Press ten keys 4 to change length
between steps A.
5) Press ENTER button 5.
A